Difference Between the Yenko Camaro and COPO Camaro

 

Difference Between the Yenko and COPO 

Most people probably know about how badass the Yenko and the COPO Camaros are, but how many people know where the names come from and what’s the difference between the two. Of course, if you are a diehard Camaro fan with a lot of knowledge of the first generation Camaros, you probably know some or all of the facts, but just in case you don’t, here is a little bit of education.

The Yenko

In 1967, Don Yenko, owner of Don Yenko Chevrolet, contacted General Motors and ordered 54 Camaros straight from the factory with a special mission in mind. That special mission was to convert those Camaros into Yenko drag strip-ready IHRA/NHRA Stock and Super Stock Camaro competitors.

(How many Yenko Camaros were built and sold from 67 through 69 is really unknown. The same goes with COPO Camaros; ask ten different experts and you're likely to get ten different answers).

When these Camaros first showed up at the Yenko Dealership, the first order of business was to take out the existing 396-cu.-in. engines and replace them with 427 big-blocks. Although a lot of numbers swirled around about how much horsepower they produced, it was estimated around 425-450-hp (depending on who you asked). Along the way, Yenko also had all Yenko labeled Camaros beefed up with other goodies like traction-bars and 3:73-positraction rear-ends. 

There was only one problem with Team Yenko’s plan to turn the Camaros into drag strip-ready Camaros, they were not allowed to race in the IHRA/NHRA Stock or Super Stock classes. These classes were strictly for cars that had no engine changes or any other big mechanical changes after they left the factory. They were not banned from all drag racing, just the Stock and Super Stock classes that the Yenko Team was aiming for, so eventually the Yenko program was canned. 

A lot of people think that the reason Yenko stopped the program was because of the inability to race in their intended classes. That was part of the reason, but most of the reasons were because Yenko was losing money on the pulled 396 motors and rear-ends they could not seem to get rid of and the program was losing even more money since GM would no longer warranty the Camaros if they were modified after they left the factory. That either fell in the hands of the owner or Yenko himself.

 

69 COPO Camaro   

It’s true, the name strikes fear in the hearts of racers who dare to pull up next to one in the staging lanes. They dominated the Stock and Super Stock classes for a long time.

COPO stands for (Central Office Production Order) and this program was invented specifically to put competitive Camaros in those Stock and Super Stock classes. If you ordered a Camaro from the central office, the build sheet would go to the factory, and when the Camaro rolled off the factory line complete, whatever you asked to be installed would be installed and considered stock. With that being said, there was nothing IHRA or NHRA could do about excluding the cars from racing in stock classes.

Ultimately, it was Fred Gibb and Don Yenko that pushed Chevrolet into making this program happen. Chevy saw the need for competitive Camaros in these classes for the use of sponsorship and of course bragging rights. They were Camaros, they were stock, and they were Mustang and Mopar eaters for a long time at the track. The 427 big-blocks made 425-hp and 460-lb.-ft. of torque, they took home a lot of trophies.  

Last Note 

A lot of people believe the COPO division was designed for the 69 ZL1-Camaro and then squashed, and then brought back in 2013 for the Camaro again. But the General Motors COPO Division has been around since GM made fleet vehicles e.i. cop cars, taxis, tow trucks, etc. All vehicles that are ordered specially from a corporation, charity, a government, or something like that are considered specialty-made vehicles or COPO vehicles. (It wasn’t just a program made up for one of the baddest Camaros ever produced, the Camaros just stole the spotlight). 

  

 

eCOPO Camaro: The Future Of Drag Racing?

eCOPO Camaro

You won’t see this at the drag strip every day, an all-electric eCOPO Camaro beating its original record-breaking quarter-mile times of low 10’s by dipping into the 9’s. It’s an eerie sight to see, a COPO Camaro that usually sounds like a monster do a smokey burnout, a front wheels-up launch, and a 9-second pass without barely making a sound.

The eCOPO Camaro was hitting 10.14’s (give or take) regularly with 80-percent juice being fed to it. No one knows how much juice was being fed to the Camaro when it made its groundbreaking 9-second pass, but whatever the case, the eCOPO stopped the clocks at 9.837-seconds and cross the traps at 134 mph.  

The eCOPO Camaro was debuted at the 2018 SEMA show last October. The Camaro uses the same body structure and body design as the standard COPO Camaro that Chevrolet offers to private drag racers and drag racing teams for the NHRA Eliminator class. This electric setup Camaro even uses the same three-speed automatic transmission and solid rear-axle as its sibling COPO.

The setup the eCOPO uses is two electric motors drawing power from four 200-volt modules that are evenly placed throughout the car for even weight distribution. The setup is said to produce an estimated 780 horsepower and 780 pound-feet of torque.

If there is ever an electric drag racing class that comes about, the eCOPO uses an 800-volt charging system for quick turnaround times for round-after-round drag racing. And it is possible, if you look at Indy car racing, they have a very successful Formula E all-electric circuit that runs all year and visits a lot of the famous raceways throughout the US and world.

So is this the future of drag racing? There could possibly be a competitive class or classes that come about in the near future. But let’s face it, the power, the sound, and the thrill of hearing a combustion engine roar through the quarter-mile just won’t ever go away.   

2018 Chevrolet Camaro 50th Anniversary Hot Wheels Edition

2018 Hot Wheels Edition Camaro 

Back in 2013, Camaro offered up a Hot Wheels Special Edition Camaro that came with a Kinetic Blue Metallic paint job. For 2018, Camaro will be offering another Hot Wheels Edition to celebrate Hot Wheels' 50th Anniversary. This time the Camaro will be dressed up with a Crush Orange paint job. Although some might think that the Camaro color is the famous Camaro Hugger Orange, it’s not. The Crush orange is actually a tribute to Hot Wheels' iconic orange race tracks they produced for many years.

Stretched across the center of the Camaro, running from bumper-to-bumper, are a set of Satin Graphite racing stripes with Ice Metallic accents. Along with the 2018 Chevrolet Camaro Hot Wheels Edition package comes Satin Graphite ground effects, blacked-out bowtie badges, 50th Anniversary Hot Wheels fender emblems, darker tail lights, and orange brake calipers. Hot Wheels-inspired 20-inch wheels with Chevrolet center caps round out the bold but sleek-looking special edition exterior looks.

The interior has its own set of goodies. Special Hot Wheels Edition door sills pop right out at you when you open up the door. The gorgeous Jet Black interior is trimmed with Crush Orange stitching and other orange inserts like knee pads, door panel inserts, custom-made seats, and more. You’ll even find a Hot Wheels logo on your steering wheel for a constant reminder of your special edition purchase.

These 2018 Chevrolet Camaro Hot Wheels Edition packages can be ordered on the 2018 2LT and 2SS Camaros for $4,995.00. At the 2017 SEMA Show Chevrolet introduced the new 2018 COPO Camaro Hot Wheels Edition with an updated 302 small block race engine. Most of the special accented parts and accessories that you receive on the Hot Wheels 2SS and 2LT trim models are the same on the COPO with two big exceptions. The wheels and tires are different and beefier to accommodate competition racing, and on the doors and quarter panels of the COPO is a pretty good-sized Hot Wheels 50th-anniversary decal that is a little lighter shade of orange than the Crush Orange. So although a pretty big decal, it’s not intrusive to the exterior look.

The 2018 Chevrolet Camaro Hot Wheels Edition can be ordered both with the coupe and the convertible. These are going to be limited edition Camaros, and orders have already been being processed with delivery dates sometime in the spring of 2018.  

COPO Camaro 2016: A Tall Order to Fill

When it comes to the 2016 COPO Camaro, as with the previous years, Chevrolet will only be producing 69 of them. The problem is there are already some 5,500 order forms filled out all from customers that want the drag strip ready race Camaro.


As of the end of January, at the world-famous Scottsdale, AZ. Barrett-Jackson Auto Auction, the first 2016 COPO Camaro was auctioned off for $300,000.00. This COPO Camaro was one of the big-block drag car versions that was specially designed with Courtney Force giving a lot of help in the color scheme and overall look of the Camaro. Unfortunately, big wallets that buy cars from these very prestigious auctions don't buy them to race them. So this car will not only most likely find its home in some museum somewhere, but it also brings down the total of COPO Camaros left to purchase to 68.

There will be three different powerplants that can be ordered with the COPO Camaro. One will be the monstrous naturally aspired 7.0-liter V-8, another engine option will be a 6.2-liter 376-cu.-in. LT engine and a 5.7-liter with a Whipple supercharger will also be an option. The COPO that was auctioned off at the Barrett-Jackson auction in January came with the 5.7 supercharged setup along with a race-ready THM-350 transmission, the other two engine options will also come with this tranny setup.


That all sounds good, but what if you're not one of the special ones, and, believe me, you will have to be special, to get picked to own a 2016 COPO Camaro. Well, the good news is if you have a big enough pocketbook, the drivetrain and the parts that run the COPO Camaro will be available by order through Chevrolet. You may not technically be able to have a true COPO, but getting your Camaro to move as fast as one will definitely be feasible.

This probably won't happen, but maybe Chevrolet will get their heads out of their asses and see the COPO Camaro's potential for growth and make a few extra ones next year. 

2013-17 COPO Camaro: Strictly Business

The COPO (Central Office Production Ordered) Camaro is the rarest of all the Camaros that is available to the public. It was first introduced in 1969 and was built by General Motors for the sole purpose of drag racing. The ideal behind it was to bring competition to the NHRA (National Hot Rod Association) drag racing circuit. Up until 1969, the Ford Cobra Jets and Dodge HEMIs dominated the Stock and Super Stock circuits because the Camaro did not meet NHRA rules and regulations and was unable to race. So to fix that problem, GM decided to make sure the COPO Camaro would be produced and delivered to the consumer with every NHRA rule and regulation followed.

Although the existence of the '69 COPO Camaro would be short lived, the legend would stick around up until present day. Starting in 2013,  General Motors brought it back with the same intentions, strictly drag racing. 

There will be 138 COPO Camaros that will be produced and sold for 2013 and a pacific number each year after. There will be three different engine options for the consumer to choose from: A 427 cubic inch naturally aspired V-8, a 327 cubic inch V-8 with a 2.9L supercharger and a 327 cubic inch V-8 with 4.0L supercharger. The Camaros will also have a special designed drag race suspension including a rear solid axle, racing tires, role cage and a fuel cell with an easy access exterior on/off switch. You will also find that there is no back seat, but you will have full functioning racing harnesses for the front seats which all complies with NHRA's rules and regulations.


What makes these cars so rare outside of its raw horsepower and racing capabilities? The COPO Camaro is the only American made cars that you can buy that have no VIN. #, no title and they can not be registered to drive on public roads.

2013 Special Edition COPO Camaro Convertible 

A special edition convertible version of the COPO Camaro was auctioned off at the Barrett-Jackson Auction in 2012. General Motors managed to bring in $400,000 dollars for the first ever sold 2013 Inferno Metallic Orange Camaro with all proceeds going to help the American Heart Association.

Now, if you were someone that wanted to get your hands on one of these rare Camaros, you would not have to shell out $400,000 dollars, but you should expect to at least shell out about $89,000 dollars, that is if you are someone who is lucky enough to order one before there all gone.

COPO CAMARO GENERAL INFORMATION:

NHRA horsepower ratings:

• 327/4.0L supercharged– 550
• 327/2.9L supercharged – 500
• 427 Naturally aspirated – 425

NHRA shipping weights:

• 327/4.0L – 3175 lbs
• 327/2.9L – 3250 lbs
• 427/N/A – 3195 lbs

• Recommended max engine RPM – 7500

CHASSIS:

• Chrome-moly cage – NHRA certified to 8.50 ET
• Subframes tied together
• Front engine cradle modified to accept additional oil pan clearance
• Rear subframe modified to accept unique COPO NHRA Stock Eliminator suspension

REAR SUSPENSION:

• 4-bar with adjustable top links
• Adjustable panhard link
• Double-adjustable Strange Engineering coil over shocks
• Anti-roll bar

FRONT SUSPENSION:

• Adjustable Strange Engineering coil over struts
• Sway bar removed

STEERING:

• Production steering gear modified for manual (non-assist) operation

BRAKES:

• Light-weight vented rotors
• Billet 4-piston light-weight calipers
• Light-weight tandem master cylinder
• OEM pedal modified to mount master cylinder
• All components provided by Strange Engineering

WHEELS:

• Bogart Racing light-weight with unique COPO logo
• Forged outer ring
• Billet center
• 15” x 10” rear – 5/8” studs
• 15” x 3.5” front – 1/2” studs
•  4 – 3/4” bolt circle pattern

TIRES:

• Rear – 9” x 30” x 15” radial slick
• Front – 4.5” x 28” x 15” – drag-only

GEARS & AXLES:

• Strange Engineering 9” aluminum center section
• Light-weight steel spool
• Strange 9310 alloy 4.29 ring & pinion set
• Strange Engineering 35-spline axles
• Strange Engineering chrome-moly yoke

DRIVE SHAFT:

• 4” OD x .125” wall 6061-T6 aluminum tube
• Chrome-moly end caps
• Forged chrome-moly slip yoke
• Heavy-duty 1350 universal joints

TRANSMISSION:

• ATI Racing Products “Pro Glide”
• SFI-approved ATI “Super Case”
• 1.80 ratio 9310 straight cut gear set
• Precision balanced carrier with 4340 tool steel output shaft
• Turbo spline input shaft:
• 327/4.0L – Vasco material
• 327/2.9L and 427 – 300M material
• 7 clutch high gear pack
• Billet clutch hub
• High flow front pump with heat-treated pinned stator tube
• Deep aluminum pan
• Hard Chrome Rings
• Fluid overflow catch can

TORQUE CONVETER:

• ATI Racing Products “Treemaster MRT” Series
• 327/4.0L – 9” diameter housing
• Furnace brazed impeller and turbine fins
• Precision pump drive tube
• Heavy duty needle bearings
• 22 element sprag with dual cage construction
• 327/2.9L and 427 – 8” diameter housing
• Furnace brazed impeller and turbine fins
• Precision pump drive tube
• Heavy duty needle bearings
• Investment Cast Cover

SHIFTER:

• Hurst “Quarterstick” – 2-spd. automatic
• Forward pattern
• Built-in neutral safety switch
• Light-weight aluminum cover

327 ENGINE:

• Chevrolet Performance “LSX” cast iron block with steel main caps
• 4.065” bore x 3.150” stroke
• Static compression ratio – 10:1 nominal
• Callies 4340 crankshaft – double-keyed snout
• Callies 4340 H-beam “Ultra” rods
• 6.350” length
• .928” pin bore diameter
• Clevite H-Series heat-treated tri-metal rod & main bearings
• Mahle 2618 alloy forged domed pistons
• Graphal coating
• Hard-anodized top ring groove
• Friction-coated skirts
• Mahle .043” x .043” x 3mm piston rings
• Ductile iron top with radius molybdenum face
• Plain cast iron tapered 2nd
• Chrome-plated oil rails with low-tension expander
• Comp Cams steel billet hydraulic roller camshaft
• Duration – 246°/254° @ .050” lift
• Theoretical valve lift – .630”/.630”
• Lobe centers – 117°

Valvetrain:

• Chevrolet Performance “Ceramic Ball” high-RPM hydraulic roller tappets
• 3/8” diameter LS7 pushrods
• 1.8:1 ratio LS7 rocker arms with roller trunions
• PSI “Max Life” beehive valve springs
• Hardened steel spring seats
• Light-weight steel retainers
• Fully CNC’ed aluminum cylinder heads – based on LS7
• 275 cc nominal intake port volume
• 89 cc nominal exhaust port volume
• 70 cc nominal combustion chamber volume
• Del West titanium intake valves – 2.200” head diameter x 7mm stem
• Light-weight sodium-filled exhaust valves – 1.610” head diameter x 7mm stem
• Fel-Pro Performance multi-layer steel head gaskets with raised cylinder sealing bead
• Internal wet sump oil pump
• Deep-sump cast aluminum oil pan – 6 quart capacity
• ATI Performance Products SFI-approved damper – 10-rib shell
• Whipple twin-screw supercharger
• 327/550 – 4.0L
• 327.500 – 2.9L
• Whipple billet throttle body
• 327/550 – 172mm oval blade
• 327/500 – 109mm round blade

427 ENGINE:

• Chevrolet Performance LS7 aluminum block
• 4.125” bore x 4.00” stroke
• Static compression ratio – 13:1 nominal
• Callies 5140 crankshaft
• Callies 4340 H-beam rods
• 6.100” length
• .928” pin bore diameter
• Clevite H-Series heat-treated tri-metal rod & main bearings
• Mahle 2618 alloy forged domed pistons
• Graphal coating
• Hard-anodized top ring groove
• Friction-coated skirts
• Mahle .043” x .043” x 3mm piston rings
• Ductile iron top with radius molybdenum face
• Plain cast iron tapered 2nd
• Chrome-plated oil rails with low-tension expander
• Chevrolet Performance steel billet hydraulic roller camshaft
• Duration – 233°/276° @ .050” lift
• Theoretical valve lift – .630”/.630”
• Lobe centers – 107°

Valvetrain:

• Chevrolet Performance “Ceramic Ball” high-RPM hydraulic roller tappets
• 3/8” diameter LS7 pushrods
• 1.8:1 ratio LS7 rocker arms with roller trunions
• PSI “Max Life” beehive valve springs
• Hardened steel spring seats
• Light-weight steel retainers
• Fully CNC’ed aluminum cylinder heads – based on LS7
• 275 cc nominal intake port volume
• 89 cc nominal exhaust port volume
•  70 cc nominal combustion chamber volume
• Del West titanium intake valves – 2.200” head diameter x 7mm stem
• Light-weight sodium-filled exhaust valves – 1.610” head diameter x 7mm stem
• Fel-Pro Performance multi-layer steel head gaskets with raised cylinder sealing bead
• Internal wet sump oil pump
• Deep-sump cast aluminum oil pan – 6 quart capacity
• ATI Performance Products SFI-approved damper
• Meziere billet electric water pump
• Chevrolet Performance/Holley “Hi Ram” intake manifold
• Whipple billet throttle body – 102mm blade

FUEL SYSTEM:

• Aeromotive “Eliminator” fuel pump – free flow rating = 800 lb/hr
• Aeromotive A1000 pressure regulator with manifold pressure compensation capability
• Aeromotive 10-micron high-flow filter
• Light-weight black nylon braided -8 AN hoses
• Black anodized aluminum -8 AN hose ends and fittings
• High-impedance fuel injectors
• 327/550 – 105 lb/hr @ 43.5 psi with EV1 connector
• 327/500 – 80 lb/hr @ 43.5 psi with EV1 connector
• 427/425 – 42 lb/hr @ 58 psi with EV6 / USCAR connector

ENGINE CONROLS & IGNITION:

• Delco MEFI 5A electronic fuel injection processor
• Speed density operation
• Interfacing software & hardware available in the aftermarket
• Cable-actuated throttle
• Production LS7 ignition coils
• Production LS7 secondary wires
• GM sensors

ELECTRICAL:

• Dash-installed control switches:
• Starter
• Ignition
• Fuel pump
• Cooling fan
• Intercooler pump/water pump, depending on engine package

GAUGES:

• Autometer with gold “Bowtie” logo on dials:
• 5” 10K RPM tach with shift light
• Electronic water temp with 2 1/16” face and 100°-260°F range
• Electronic trans temp with 2 1/16” face and 100°-260°F range
• Electronic oil pressure with 2 1/16” face and 0-100 psi range
• Electronic fuel pressure with 2 1/16” face and 0-100 psi range
• Voltmeter with 2 1/16” face and 8-18v range

SAFETY:

• RJS Safety Equipment 3” driver restraints
• RJS Safety Equipment window net

Difference Between the Yenko Camaro and COPO Camaro

Difference between the Yenko Camaro and COPO Camaro 

Redirect For Update

http://www.gmpowerhouses.com/2020/12/difference-between-yenko-camaro-and.html