1939 GM Futurliner: When People Started To Believe Big

 

A Rolling Vision of the Future

Few vehicles capture the imagination quite like the General Motors Futurliner. Towering, futuristic, and unmistakably bold, the Futurliner wasn’t just a mode of transportation—it was a rolling stage for America’s dreams of tomorrow. Built for GM’s “Parade of Progress,” this massive machine symbolized innovation, optimism, and the spirit of forward-thinking design that defined pre-and post-war America.

A Brief History Of The GM Futurliner 

The Futurliner was first introduced in 1939 for General Motors’ traveling exhibition, the Parade of Progress. The event was essentially a mobile world’s fair that brought cutting-edge science and technology displays to towns across the country. GM built twelve Futurliners in total, each one measuring about 33 feet long, 8 feet wide, and standing nearly 12 feet tall.

They were used from the late 1930s through the mid-1950s, with updates made in 1953 to keep their styling in line with GM’s design language of the era. Today, only a handful survive, and fully restored examples are considered some of the most prized vehicles in the world of automotive history.

Take A Look Inside the Futurliner

The interior of the Futurliner was unlike anything the public had ever seen in the 1940s and ’50s. Instead of simple passenger seating, each unit was built as a mobile exhibition space. The driver sat high up in a cockpit-like cab, while the rest of the body was devoted to large display areas that would open up once the vehicle reached its destination.

Exhibits and Displays

Each Futurliner was assigned a specific theme and outfitted with custom displays to showcase GM’s vision of the future. Some examples included:

• Jet Engines and Aircraft Technology – Showcasing aviation advancements and jet propulsion.

• Household of the Future – Exhibiting futuristic appliances and conveniences that would someday be common.

• Science and Industry – Highlighting cutting-edge scientific research and industrial design.

• Power of the Atom – Introducing nuclear energy to a curious public.

The interiors often featured dramatic lighting, models, interactive demonstrations, and art deco-inspired design touches, reinforcing GM’s message that science and progress were not just functional but beautiful.

The 1939 GM Futurliner Drivetrain

Underneath its futuristic shell, the Futurliner was powered by a heavy-duty Detroit Diesel four-cylinder GMC diesel engine, later upgraded in some units to a 302-cubic-inch GMC inline-six gasoline engine. These powerplants were built for torque and reliability rather than speed, ensuring the massive 30,000-pound vehicles could haul themselves across the country. Power was delivered through a four-speed manual transmission with a two-speed splitter, giving the driver plenty of gear choices to handle the heavy load.

Wheels and Tires

One of the Futurliner’s most striking visual features is its oversized wheels and tires. Each vehicle rode on dual rear wheels and massive 10.00x20-inch truck tires, wrapped around full-disc wheel covers that enhanced the futuristic look. Combined with its wide stance and tall profile, these wheels gave the Futurliner a commanding presence whether parked at a fairground or rolling down the highway.

Did You Know?

• Only nine of the original twelve Futurliners are known to still exist, with varying degrees of restoration.

• A fully restored Futurliner once sold at Barrett-Jackson for over $4 million, setting a record for vintage GM vehicles.

• The driver’s seat was positioned in the very center of the cab, giving it a cockpit-like view similar to that of a bus or even an aircraft.

• Each Futurliner had hydraulically operated side panels that folded open to reveal the displays inside, almost like giant wings unfolding.

• The design was overseen by Harley J Earl, GM’s legendary head of styling, who also influenced icons like the Corvette and Cadillac tailfins.

As We Still Keep Dreaming

The General Motors 1939 Futurliner is more than just a truck—it’s a time capsule of American innovation and optimism. Its unique blend of futuristic design, educational exhibits, and sheer presence made it a rolling icon of the mid-20th century. Today, the Futurliner remains one of the most fascinating and celebrated vehicles ever created, a symbol of how the past once dreamed of the future, AND We Still Keep Dreaming!

1956 Firebird II by General Motors: Dreaming Futuristic

 

Is it a bird? Is it a plane? 

Well, it's something like that: A 1956 Firebird II turbine concept built by some of the most out-of-the-box thinkers from General Motors.

The 1950s were a golden era for futuristic cars, and none captured the optimism of the time quite like the 1956 Firebird II. Built by General Motors as part of its experimental Firebird series, the Firebird II was unveiled at GM’s Motorama show as a glimpse into the future of family transportation.

Unlike the radical single-seat Firebird I, which resembled a jet fighter on wheels, the Firebird II was designed as a four-passenger concept car. Harley Earl, GM’s legendary styling chief, envisioned it as a family vehicle of the future—one that would combine turbine power with aircraft-inspired design.

Although the Firebird II was never intended for production, it remains one of the most ambitious and advanced concept cars GM ever created. Today, it stands as a symbol of mid-century innovation and the bold spirit of Motorama

Firebird II Turbine Performance

At its core, the Firebird II featured the Whirlfire GT-304 gas turbine engine, a 200-horsepower powerplant capable of running on a variety of fuels such as kerosene, diesel, or jet fuel. Turbine technology fascinated GM engineers because it promised fewer moving parts, lower maintenance, and higher reliability compared to piston engines.

The Firebird II wasn’t just about raw power—it was about reimagining the future of driving. GM constructed the car’s body out of titanium, an incredibly strong and lightweight material rarely used in automobiles even today. The Firebird II also incorporated one of the boldest ideas of the 1950s: automated highways.

Engineers designed the Firebird II with sensors that could communicate with wires embedded in the road, allowing the car to guide itself automatically. This vision of self-driving cars was decades ahead of its time, proving just how forward-thinking the GM engineers were with this Firebird II. 

A Wacky Appearance

The Firebird II looked nothing like an ordinary 1950s automobile. Its design borrowed heavily from jet fighters, with a sharply pointed nose, a sleek canopy roof, and pronounced tailfins that gave it an unmistakably futuristic look. The car’s wide stance and low profile emphasized aerodynamics, while four exhaust outlets at the rear showcased its turbine engine.

Where typical family cars of the 1950s were boxy and conservative, the Firebird II looked like it came straight out of a science fiction movie. Chrome trim, smooth lines, and space-age details made it a showstopper at Motorama and a visual icon of GM’s futuristic vision.

Complicated, Crazy Interior 

Inside, the Firebird II continued its aviation-inspired theme. The cabin featured individual bucket seats for all four passengers, separated by a central console that ran the length of the interior. The controls and instrumentation resembled those of an aircraft, reinforcing the idea that the Firebird II was more machine than car.

The most striking feature was the wraparound bubble canopy, which gave panoramic views and bathed the interior in light. It wasn’t just about style—the canopy emphasized the futuristic experience GM wanted to deliver with the Firebird II, making every passenger feel like part of a space-age adventure.

Did You Know?

• The Firebird II was the first turbine-powered concept car designed specifically as a family vehicle.

• Its titanium body made it one of the most advanced material experiments of its era.

• GM designed the Firebird II to operate on an automated highway system, an early vision of autonomous driving.

• The Firebird II was fully functional and toured the country as part of GM’s Motorama exhibitions.

• Today, the Firebird II survives as part of the GM Heritage Center collection.

If You Dream It, You Can Build It

The 1956 Firebird II was far more than a show car—it was a rolling vision of the future. With its gas turbine engine, titanium body, bubble canopy, and experimental automated guidance system, the Firebird II embodied the limitless imagination of 1950s America.

While turbine engines never replaced conventional power and automated highways remained a dream, the Firebird II showed how daring and innovative General Motors was willing to be. It remains a milestone in concept car history, admired not only for its futuristic styling but also for its ambitious technology.

In the end, the Firebird II wasn’t just an automobile. It was a dream machine—a bold experiment that pushed the boundaries of engineering and design, and a reminder of an era when the future of driving seemed as thrilling as the jet age itself.

Monte Carlo Aerocoupe: An Odd Look That Became A Classic

 

The 1986 and 1987 Chevrolet Monte Carlo Aerocoupe models are rare and legendary pieces of GM’s performance legacy. Built primarily to meet NASCAR homologation requirements, these limited-edition Monte Carlos blurred the line between street car and race car. With unique aerodynamic styling and performance tweaks, the Aerocoupe helped Chevrolet dominate stock car racing in the late '80s

A Brief History of the Unique Monte Carlo Aerocoupe

Chevrolet introduced the Aerocoupe in 1986 as a response to increasing competition in NASCAR, particularly from Ford’s aerodynamic Thunderbird. The goal was to streamline the Monte Carlo’s body to reduce drag and improve high-speed stability. NASCAR rules required at least 200 examples to be sold to the public to qualify for racing. Chevrolet built just 200 Aerocoupes in 1986, but demand—and racing success—prompted a much larger production run of 6,052 units for 1987. All Aerocoupes were based on the Monte Carlo SS trim, pairing aggressive styling with the usual underwhelming V8 horsepower outputs for that era. 

Appearance and Design

The Aerocoupe stood out from the standard Monte Carlo with its distinctive sloped rear window and shortened trunk lid, a feature designed to improve airflow over the rear of the car. It retained the SS’s front air dam, body-colored bumpers, and subtle rear spoiler. The fastback glass gave the coupe a sleek, almost European look, yet its squared-off front kept the car unmistakably American.

Performance Features

• Engine: 5.0L (305 cubic inch) High Output V8

• Horsepower: 180 hp @ 4,800 RPM

• Torque: 225 lb-ft @ 3,200 RPM

• Transmission: 4-speed automatic with overdrive (200-4R)

• Suspension: Performance-tuned F41 that included firmer springs and tougher bushings, and larger front and rear sway bars

• Brakes: Front disc, rear drum setup

• Rear Axle Ratio: 3.73 for improved acceleration

• Top Speed: Estimated 120 mph

• 0–60 Time: Approximately 8.5 seconds

Something Cool to Know

The Monte Carlo SS Aerocoupe design played a crucial role in helping Dale Earnhardt secure the 1986 and 1987 Winston Cup Championships. The improved aerodynamics of the rear window design gave Chevrolet a significant edge on superspeedways like Daytona and Talladega. This "win on Sunday, sell on Monday" success made the Aerocoupe a sought-after collectible even today.

Love or Hate the Odd Design

The 1986 and 1987 Monte Carlo Aerocoupe models weren’t just styling oddities—they were purpose-built muscle cars with a mission. Their brief production run for winning NASCAR purposes, and distinctive design make them standout classics from the 1980s. For collectors and racing fans alike, the Aerocoupe remains a street-legal piece of Chevrolet’s championship-winning legacy.

1983 Corvette C4: Only One In Existence

  

1983 C4 Corvette

That's right, above is the only 1983 C4 Corvette that exists. Most people don't believe that there were any built for that year, but there were a few (none sold), and there is one survivor that resides at the National Corvette Museum in Bowling Green, Kentucky. 

For the people who do know it exists, they often refer to it as a 1 of 1 Corvette. But this is not true because, altogether there were 14 prototypes built and 43 "Pilot Cars" built, which were going to be sold to the public. The surviving '83 Corvette was #4 in the bunch that rolled off the assembly line at the Bowling Green, Kentucky, Corvette Plant. 

What Happened to the Other '83 C4? 

General Motors, Corvette executives, engineers, and designers decided that with all of the quirks of the new frame, new body style, and all the other things that still needed more engineering adjustments, the new generation just wasn't ready to be sold to the public. 

They also decided that the original T-tops weren't the way to go. They wanted to design a targa top for the Corvette because it would be more appropriate to keep up and compete with the design of the European sports cars.

After testing the Corvettes at the GM Milford proving grounds, all 1983 C4 Corvettes were marked for destruction. It's a common practice for automotive companies to crush cars they have no intention to sell to the public. 

GM brought in their car crusher and got to work turning the test Corvettes into hunks of metal. This is where the story gets dicey. No one really knows how this #4 1983 Corvette with the VIN # 1G1AY0783D5110023 survived, but one of the stories is that someone hid the Corvette just to keep at least one left around. 

Another story goes that the work crew ended their shift, and the last remaining Corvette was simply going to be put out of its misery the next day. Fortunately, for the survival of this piece of history, the compactor was picked up early and taken away, leaving the #4 1983 Corvette forgotten about.

There are more than just two stories, but we would all just be guessing as to what the true story is. But the story of how it was found is quite frank. Two years after the crushing of the '83 Corvettes, the Bowling Green Plant Manager was poking around the car lot on a different mission and found the out-of-shape, dirty, run-down '83 Corvette on a fluke. 

Not knowing exactly what the sports car was or why it was sitting there, the Corvette was pulled into the plant, and the  VIN # was cross-referenced with meticulous records, eventually revealing its true identity.  

Bringing The '83 Back to Life

The guys at the plant cleaned the Corvette up and gave it a red, white, and blue paint job. The Corvette stayed at the plant until 1994, when the National Corvette Museum was built, which was built right across the street from the famous Bowling Green, Kentucky Corvette Assembly Plant. 

Realizing how important the Corvette was to Corvette history, it was eventually donated to the Corvette Museum. The decision was made to repaint the Corvette back to its original white body color with the original blue interior color, and everything else was restored back to its original condition according to records. 

The '83 Corvette became a showcase for the grand opening of the National Corvette Museum, especially since most people didn't even know that they ever existed. 

The 1983 Corvette leap year is said to be one of Corvette's best decisions. They would have put a vehicle on the market that had massive changes for a new generation, but still needed a lot of work to get it perfect. 

When the 1984 Corvette was introduced, it made a big splash in the market, and everyone enjoyed the new look, sophisticated suspension, stiffer chassis, and the many other upgrades that came along with it.  

Own A '63 Corvette Grand Sport Without Paying Millions

  

Rare Corvettes for Less

Some of the rarest sports cars of all time are a group of five early '60s Corvette Grand Sports built with the sole purpose of running in the GT classes at the Sebring 12 Hours and the 24-hour LaMans races.

The Godfather of Corvettes, Zora Arkus-Duntov, led the crusade of light-weight race-ready roadsters that were designed to compete with the dominant Ford GTs and the rest of the field's competitors.

Duntov had planned on building 1,000 of these Corvettes, but only five Corvette Grand Sports were originally built in the ‘60s.

Two of the Corvettes [#001 and #002] were put to the side and three others were sent to John Mecom of Houston, TX, who eventually sent them off to three other prominent individuals in the racing industry.

Purchasing One Of These Rare Beauties

So let's say you were not lucky enough to be one of those people who received one of those five Corvettes, but now you would like to see if you can purchase one today.

Well, although these Corvettes are not relevant in the 24-hour LaMans and other races anymore, fat chance of getting your hands on one for under five million dollars.

A few years back, the #002 Corvette Grand Sport found its way to an auction block, and although the high bid was $4.9 million, it was still not enough to take the blue beautiful race car home.

If you're like most car guys, you probably don't have $4.9 million sitting around for a sports car that you wouldn't even want to drive that much anyway. But getting something similar and in many cases, much more modern and drivable with an affordable price tag is definitely feasible. 

Superformance, a car-building company in Southern California pushed to get granted the licensing to build replicas of Zora Duntov’s famed Corvette Grand Sport, making it possible to own one, well, at least a replica of one.

Superformance was even granted original build sheets for the #002 Grand Sport Corvette. They claim that if you wanted a replica almost identical to the original, they could build you one that only experts could tell it’s not an original #002 Grand Sport.

But like a lot of people, you're probably just looking for the look of the legendary Corvette and the performance and comforts of a newer vehicle, and that's fine, Superformance is dedicated to building Vettes like that. 

Customize Your Own Corvette Grand Sport

Superformance will work you up a vintage Corvette Grand Sport of your liking. Features like power steering, four-wheel disc brakes, power windows, A/C, and fully independent front and rear suspension with Bilstein suspension components can be optioned up for your Vette. There are roadster versions available, but they will look and drive more like the race Corvettes of the past, and many features and options of the coupe will be limited. But as far as power plants go, Superformance offers a variety of engines, including an LS9 supercharged monster that can really make the coupes and the roadsters fun to drive.

There are actually seven engines in all to choose from. All engines come with a 2/year 50,000-mile warranty that can be serviced at your local authorized dealer. The greatest thing about the Superformance Corvette Grand Sport replica is the price tag.

Depending on your options and how customized you want it, your price tag will still be just a fraction of the price you would have to pay for the real thing.

Let's go cruising